View occupational profile

Search the OaSIS

Concrete finishers

OaSIS code 73100.00

Concrete finishers smooth and finish freshly poured concrete, apply curing or surface treatments and install, maintain and restore various masonry structures such as foundations, floors, ceilings, sidewalks, roads, patios and highrise buildings. Apprentices are also included in this unit group.

Overview

Also known as

  • Cement finisher apprentice
  • Cement mason
  • Concrete finisher
  • Concrete mason
  • Precast concrete finisher

Main duties

This group performs some or all of the following duties:

  • Check formwork, granular base and steel reinforcement materials and direct placement of concrete into forms or onto surfaces according to grade
  • Fill hollows and remove high spots to smooth freshly poured concrete
  • Operate power vibrator to compact concrete
  • Level top surface of concrete according to grade and depth specifications using straightedge or float
  • Impart desired finish to concrete surfaces using hand and power tools
  • Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete
  • Apply hardening and sealing compounds to cure surface of concrete
  • Waterproof, damp-proof and restore concrete surfaces
  • Repair, resurface and replace worn or damaged sections of floors, walls, roads and other concrete structures.

Additional information

  • The Red Seal endorsement allows for interprovincial mobility.
  • Progression to supervisory positions is possible with experience.

Similar occupations classified elsewhere

Exclusions:

  • Contractors and supervisors, other construction trades, installers, repairers and servicers (72014)
  • Concrete, clay and stone forming operators (94103)
  • Bricklayers (72320)

NOC hierarchy breakdown

NOC version

NOC 2021 Version 1.0

Broad occupational category

7 – Trades, transport and equipment operators and related occupations

TEER

3 – Occupations usually require a college diploma or apprenticeship training of less than two years; or more than six months of on-the-job training

Major group

73 – General trades

Sub-major group

731 – General construction trades

Minor group

7310 – Concrete finishers, tilesetters and plasterers

Unit group

73100 – Concrete finishers

Occupational profile

73100.00 – Concrete finishers

Work characteristics

Work characteristics gathers the various components describing the work environment of each occupation, such as employers, work activities, and the work context. Each category displays up to 10 descriptors in descending order based, firstly, on their attributed ratings by the level of complexity (for Work Activities) or other measurement dimensions (for Work Context), and secondly, in alphabetical order. The whole list of descriptors and their ratings can be expanded at the bottom of each page.

Work Activities

Proficiency or complexity level
Performing General Physical Activities
5 - Highest Level
Controlling Machines and Processes
4 - High Level
Handling and Moving Objects
4 - High Level
Inspecting Equipment, Structures, or Material
4 - High Level
Operating Vehicles, Mechanized Devices, or Equipment
4 - High Level

Work Context

Structural Job Characteristics

Structured versus Unstructured Work
Degree of freedom to determine tasks and priorities
3 - Moderate amount of freedom
Work Week Duration
Worked hours in a typical week
2 - Between 35 to 40 hours

Physical Work Environment

Physical Proximity
Physical distance from others
4 - Close (at arm’s length)

Physical Demands

Sitting
Duration
0 – Not applicable
Standing
Duration
4 - More than half the time
Bending or Twisting the Body
Duration
4 - More than half the time

Interpersonal Relations

Contact with Others
Frequency
4 - Every day, a few times per day
Duration
4 - More than half the time
Work with Work Group or Team
Importance
3 - Important
Frequency
4 - Every day, a few times per day

Workplaces/employers

  • Cement and concrete contractors
  • Construction companies
  • Manufacturers of precast concrete products
  • Self-employed

Skills and abilities

This section displays the various competencies required for an occupation. Each category displays up to 10 descriptors in descending order based, firstly, on their attributed ratings by the level of proficiency (for Skills and Abilities) or importance (for Personal Attributes) and secondly, in alphabetical order. The whole list of descriptors and their ratings can be expanded at the bottom of each page.

Abilities

Proficiency or complexity level
Speed of Limb Movement
5 - Highest Level
Trunk Strength
5 - Highest Level
Dynamic Strength
4 - High Level
Finger-Hand-Wrist Motion
4 - High Level
Stamina
4 - High Level

Skills

Proficiency or complexity level
Operation and Control
3 - Moderate Level
Quality Control Testing
3 - Moderate Level
Coordinating
2 - Low Level
Equipment and Tool Selection
2 - Low Level
Evaluation
2 - Low Level

Personal Attributes

Importance
Attention to Detail
4 - Highly important
Collaboration
4 - Highly important
Stress Tolerance
4 - Highly important
Adaptability
3 - Important
Analytical Thinking
3 - Important