View occupational profile

Search the OaSIS

Drywall installers and finishers

OaSIS code 73102.02

Drywall installers and finishers install and finish drywall sheets and various types of ceiling systems. Apprentices are also included in this occupation.

Overview

Also known as

  • Drywall applicator
  • Drywall finisher

Main duties

This group performs some or all of the following duties:

  • Measure, cut and fit drywall sheets for installation on walls and ceilings
  • Position and secure sheets to metal or wooden studs or joists
  • Cut and install metal corner beads to protect exterior corners
  • Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
  • Tape over joints using taping machine and embed tape in compound
  • Smooth out excess compound and allow coat to dry
  • Apply successive coats of compound and sand seams and joints
  • Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings.

Additional information

  • Progression to supervisory positions is possible with experience.
  • The Red Seal endorsement allows for interprovincial mobility.

Similar occupations classified elsewhere

Exclusions:

  • Contractors and supervisors, other construction trades, installers, repairers and servicers (72014)

NOC hierarchy breakdown

NOC version

NOC 2021 Version 1.0

Broad occupational category

7 – Trades, transport and equipment operators and related occupations

TEER

3 – Occupations usually require a college diploma or apprenticeship training of less than two years; or more than six months of on-the-job training

Major group

73 – General trades

Sub-major group

731 – General construction trades

Minor group

7310 – Concrete finishers, tilesetters and plasterers

Unit group

73102 – Plasterers, drywall installers and finishers and lathers

Occupational profile

73102.02 – Drywall installers and finishers

Work characteristics

Work characteristics gathers the various components describing the work environment of each occupation, such as employers, work activities, and the work context. Each category displays up to 10 descriptors in descending order based, firstly, on their attributed ratings by the level of complexity (for Work Activities) or other measurement dimensions (for Work Context), and secondly, in alphabetical order. The whole list of descriptors and their ratings can be expanded at the bottom of each page.

Work Activities

Proficiency or complexity level
Performing General Physical Activities
4 - High Level
Controlling Machines and Processes
3 - Moderate Level
Handling and Moving Objects
3 - Moderate Level
Coordinating the Work and Activities of Others
2 - Low Level
Evaluating Information to Determine Compliance
2 - Low Level

Work Context

Structural Job Characteristics

Structured versus Unstructured Work
Degree of freedom to determine tasks and priorities
3 - Moderate amount of freedom
Work Week Duration
Worked hours in a typical week
2 - Between 35 to 40 hours

Physical Work Environment

Physical Proximity
Physical distance from others
3 - Somewhat close (e.g. share office)

Physical Demands

Sitting
Duration
0 – Not applicable
Standing
Duration
3 - About half the time
Bending or Twisting the Body
Duration
4 - More than half the time

Interpersonal Relations

Contact with Others
Frequency
4 - Every day, a few times per day
Duration
3 - About half the time
Work with Work Group or Team
Importance
3 - Important
Frequency
4 - Every day, a few times per day

Workplaces/employers

  • Construction companies
  • Drywalling contractors
  • Self-employed

Skills and abilities

This section displays the various competencies required for an occupation. Each category displays up to 10 descriptors in descending order based, firstly, on their attributed ratings by the level of proficiency (for Skills and Abilities) or importance (for Personal Attributes) and secondly, in alphabetical order. The whole list of descriptors and their ratings can be expanded at the bottom of each page.

Abilities

Proficiency or complexity level
Trunk Strength
5 - Highest Level
Body Flexibility
4 - High Level
Gross Body Coordination
4 - High Level
Gross Body Equilibrium
4 - High Level
Stamina
4 - High Level

Skills

Proficiency or complexity level
Quality Control Testing
3 - Moderate Level
Coordinating
2 - Low Level
Equipment and Tool Selection
2 - Low Level
Management of Material Resources
2 - Low Level
Operation and Control
2 - Low Level

Personal Attributes

Importance
Attention to Detail
4 - Highly important
Independence
4 - Highly important
Service Orientation
4 - Highly important
Adaptability
3 - Important
Analytical Thinking
3 - Important