View subgroup

Search criteria:

Search

Search by job title
Search by CH code

5226.4 – Stunt co-ordinators and special effects technicians

Stunt co-ordinators and special effects technicians develop, co-ordinate and oversee stunts and special effects for television and motion picture productions, theatre and stage productions, and other live or recorded productions.

Profile

Example titles Help

  • Special effects technician
  • Stunt co-ordinator

Main characteristics Help

  • General learning ability to design and co-ordinate special effects such as fires, explosions and crashes
  • Spatial perception to draw plans for contrivances such as towers, conveyors and wiring layouts for the set-up of special effects, actions and illusions
  • Innovative interest in analyzing information to create the illusion of phenomena such as snow, rain, smoke, waves, thunder and impact of projectiles and other effects
  • Objective interest in precision working with mechanical, chemical and electrical devices to animate incidents and to simulate special effects
  • Directive interest in speaking to arrange provision of contrivances for the set-up of special effects; and in determining methods to create desired effects

Aptitudes Help

One of five levels assigned for each factor, with levels representing normal curve distribution of the labour force:

G
General learning ability
V
Verbal ability
N
Numerical ability
S
Spatial perception
P
Form perception
Q
Clerical perception
K
Motor co-ordination
F
Finger dexterity
M
Manual dexterity

Levels legend
  1. The highest 10% of the working population
  2. Upper third, exclusive of the highest 10%
  3. Middle third of the working population
  4. Lowest third, exclusive of the lowest 10%
  5. Lowest 10% of the working population

An individual's overall capacity to learn the skills needed to perform job duties is based on his or her specific aptitudes for acquiring information and transforming it into action.

General learning ability G-3

Ability to 'catch on' or understand instructions and underlying principles; to reason and make judgments.

Verbal ability V-3

Ability to understand the meaning of words and the ideas associated with them, and to use them effectively; to comprehend language, to understand relationships between words and to understand the meaning of whole sentences and paragraphs; to present information or ideas clearly.

Numerical ability N-3

Ability to carry out arithmetical processes quickly and accurately.

Spatial perception S-2

Ability to think visually about geometric forms and comprehend the two dimensional representation of three dimensional objects; to recognize the relationships resulting from the movement of objects in space. May be used in such tasks as blueprint reading and in solving geometry problems. Frequently described as the ability to 'visualize' objects of two or three dimensions.

Form perception P-3

Ability to perceive pertinent detail in objects and in pictorial and graphic material; to make visual comparisons and discriminations and to see slight differences in shapes and shadings of figures and widths and lengths of lines.

Clerical perception Q-4

Ability to perceive pertinent detail in verbal or tabular material; to observe differences in copy, to proofread words and numbers, and to avoid perceptual errors in arithmetical computation.

Motor co-ordination K-3

Ability to co-ordinate eyes, hands and fingers rapidly and accurately when required to respond with precise movements.

Finger dexterity F-4

Ability to move the fingers and manipulate small objects with the fingers rapidly and/or accurately.

Manual dexterity M-3

Ability to move the hands easily and skillfully; to work with the hands in placing and turning motions.

Interests Help

Three of five descriptive factors, assigned in order of predominance and lower case rating indicating weaker representation:

D
Directive
I
Innovative
M
Methodical
O
Objective
S
Social

Innovative I

Innovative persons like to explore things in depth and arrive at solutions to problems by experimenting. They are interested in initiating and creating different ways to solve questions and present information. They enjoy scientific subjects. Innovative persons prefer to be challenged with new and unexpected experiences. They adjust to change easily.

Objective O

Objective persons enjoy working with tools, equipment, instruments and machinery. They like to repair and/or fabricate things from various materials according to specifications and using established techniques. Objective persons are interested in finding out how things operate and how they are built.

Directive D

Directive persons like to take charge and control situations. They like to take responsibility for projects that require planning, decision making and co-ordinating the work of others. They are able to give direction and instructions easily. They enjoy organizing their own activities. They see themselves as independent and self-directing.

Data, people, and things Help

Data

0
Synthesizing
1
Co-ordinating
2
Analyzing
3
Compiling
4
Computing
5
Copying
6
Comparing
7
N/A
8
Not Significant

People

0
Mentoring
1
Negotiating
2
Instructing - Consulting
3
Supervising
4
Diverting
5
Persuading
6
Speaking - Signaling
7
Serving - Assisting
8
Not significant

Things

0
Setting up
1
Precision working
2
Controlling
3
Driving - Operating
4
Operating - Manipulating
5
Tending
6
Feeding - Offbearing
7
Handling
8
Not significant
Data Analyzing 2

Examining and evaluating data; frequently presenting alternative action in relation to the evaluation.

People speaking 6

Talking with and/or signalling people to convey or exchange information; giving assignments and/or directions to helpers.

Things Precision working 1

Using the body and/or equipment to move, guide, place, install and/or interface with objects, in order to attain specifications and precise standards. Considerable judgment is required to select, adjust and utilize appropriate tools, products and/or materials to accomplish specified objectives.

Physical activities Help

V - Vision

1
Close visual acuity
2
Near vision
3
Near and far vision
4
Total visual field

H - Hearing

1
Limited
2
Verbal interaction
3
Other sound discrimination

L - Limb co-ordination

0
Not relevant
1
Upper limb co-ordination
2
Multiple limb co-ordination

C - Colour discrimination

0
Not relevant
1
Relevant

B - Body position

1
Sitting
2
Standing and/or walking
3
Sitting, standing, walking
4
Other body positions

S - Strength

1
Limited
2
Light
3
Medium
4
Heavy
Vision Total visual field V-4

The use of sight in the work performed. The levels are organized in terms of the visual field involved in the performance of the work.

4 - Total visual field

Work activities involve the entire field of vision – Near and far vision (3) – as well as depth perception and peripheral vision.

Examples:

  • driving vehicles
  • refereeing sports events
  • fighting fires
  • dancing onstage in ballet performances
Colour discrimination Relevant C-1

The use of colour descrimination to identify, distinguish and match colours and different shades of the same colours.

1 - Relevant

Colour discrimination is relevant in the performance of the work.

Examples:

  • observing signals while operating vehicles
  • installing, testing and repairing electrical wiring
  • restoring and conserving museum and art gallery artifacts
  • designing, constructing and repairing dentures
Hearing Verbal interaction H-2

The use of hearing in the work performed. The levels are organized in terms of the type of auditory discrimination involved in the performance of the work.

2 - Verbal interaction

Work activities involve communication with colleagues, clients and/or the public on a regular basis.

Examples:

  • operating directory listing systems to provide directory assistance to customers
  • resolving work problems and recommending measures to improve productivity
  • consulting with families of the deceased regarding funeral services
  • analyzing and providing advice on managerial methods and organization of establishments
Body position Other body positions B-4

Primary type of posture or body movement involved in performing the work. These postures or body movements range from simple to complex and from sedentary to mobile.

4 - Other body positions

Work activities involve body postures other than, or in addition to, Sitting (1) and Standing and/or walking (2) such as bending, stooping, kneeling and crouching

Examples:

  • performing labouring duties in warehouses
  • measuring, cutting and installing carpeting
  • adjusting, repairing or replacing parts and components of automotive systems
  • treating patients' disorders of the spine and body through corrective manipulation
Limb co-ordination Multiple limb co-ordination L-2

The use of limbs in performing work.

2 - Multiple limb co-ordination

Work activities are carried out by co-ordinating the movements of upper limb(s) simultaneously with lower limb(s).

Examples:

  • digging ditches using shovels
  • operating and driving automobiles, vans and trucks
  • climbing and working aloft on poles, ladders or other support structures
  • performing in figure skating competitions
Strength Light S-2

The use of strength in the handling of loads such as pulling, pushing, lifting and/or moving objects during the work performed.

2 - Light

Work activities involve handling loads of 5 kg but less than 10 kg.

Examples:

  • repairing soles, heels and other parts of footwear
  • filing materials in drawers, cabinets and storage boxes
  • preparing and cooking meals
  • repairing paintings and artifacts

Environmental conditions Help

Location

L1
Regulated inside climate
L2
Unregulated inside climate
L3
Outside
L4
In a vehicle or cab

Hazards

H1
Dangerous chemical substances
H2
Biological agents
H3
Equipment, machinery, tools
H4
Electricity
H5
Radiation
H6
Flying particles, falling objects
H7
Fire, steam, hot surfaces
H8
Dangerous locations

Discomforts

D1
Noise
D2
Vibration
D3
Odours
D4
Non-toxic dusts
D5
Wetness
Discomforts Noise D1

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D1 - Noise

Work that produces sufficient noise – constant or intermittent – to cause marked distraction or possible loss of hearing.

Examples:

  • operating drilling equipment in underground mines
  • using power saws in logging operations
  • blasting rock surface in mining
  • operating heavy equipment for construction jobs
  • using firearms
Discomforts Vibration D2

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D2 - Vibration

Work that produces an oscillating or quivering motion of the body.

Examples:

  • operating jackhammers to break up pavement
  • driving tractors
  • operating drills to produce blasting holes in mines
  • shaping metal using power-forging machinery
Discomforts Odours D3

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D3 - Odours

The presence of noxious, intense or prolonged odours in the work environment.

Examples:

  • cooking meals
  • colouring, waving and styling hair
  • preserving and sanitizing human remains
  • using industrial cleaning solutions
  • preparing standard cuts of meat, poultry and fish products for sale
Discomforts Non-toxic dusts D4

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D4 - Non-toxic dusts

The presence of non-poisonous airborne particles such as textile dust, flour, sand, sawdust and feathers in the work environment.

Examples:

  • preparing dough or batter
  • cutting fur pelts or fabric for garments
  • operating woodworking machines
  • cleaning chimneys
  • removing poultry feathers
Discomforts Wetness D5

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D1 - Noise

Work that produces sufficient noise – constant or intermittent – to cause marked distraction or possible loss of hearing.

Examples:

  • operating drilling equipment in underground mines
  • using power saws in logging operations
  • blasting rock surface in mining
  • operating heavy equipment for construction jobs
  • using firearms
Hazards Dangerous chemical substances H1

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H1 - Dangerous chemical substances

Exposure to any chemical that may endanger health through inhalation, absorption or ingestion, contact with skin or eyes, or any chemical with the potential for fire or explosion. Substances may be in forms such as solids, liquids, gases, aerosols or particles.

Examples:

  • extracting coal (involves exposure to silica particles)
  • removing asbestos insulation from buildings
  • joining bricks with mortar (contains lime)
  • mixing pesticides to spray crops
  • painting building interiors
Hazards Equipment, machinery, tools H3

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H3 - Equipment, machinery, tools

Working near or with equipment, instruments, machinery or power/hand tools that may be a potential source of accident or injury.

Examples:

  • operating metal machining tools to shape metal
  • using hand tools to fabricate wood products
  • operating power saws to thin trees
  • performing surgical procedures
Hazards Electricity H4

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H4 - Electricity

Exposure to electrical circuitry, high tension wires, transformers or other equipment that may be a potential source of electrical shock.

Examples:

  • installing or repairing electrical wiring, motors and generators
  • maintaining underground power transmission and distribution systems
  • operating semi-automatic electric arc welding equipment
  • repairing industrial electrical control systems and devices
Hazards Flying particles, falling objects H6

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H6 - Flying particles, falling objects

Exposure to flying particles and falling objects in the work environment that pose the risk of bodily injury.Flying particles refer to particles such as wood chips, metal particles and rock chips generated by the handling, crushing, grinding, rapid impact or explosion of materials.

Examples:

  • operating machining tools such as lathes/grinders
  • constructing underground installations in mines using hand and power tools
  • operating chain saws to fell, delimb and buck trees
  • operating hoisting devices to load cargo onto ships
  • laying brick to construct or repair walls
Hazards Fire, steam, hot surfaces H7

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H7 - Fire, steam, hot surfaces

Exposure to fire (rather than exposure to flammable substances that may ignite), to emissions of steam or to intensely hot surfaces that are potential sources of injury.

Examples:

  • fighting fires
  • operating gas flame welding equipment
  • cooking food
  • forging metal items by hand or with forging machinery
  • tending industrial ovens/furnaces
Hazards Dangerous locations H8

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H8 - Dangerous locations

Working in locations that are inherently treacherous and are potential sources of injury. Such work locations include construction sites, underground sites, erected support structures and marine environments.

Examples:

  • building underground passageways in mines
  • installing roof shingles
  • washing exterior windows of buildings
  • commanding fishing vessels
  • operating underwater video, sonar, recording and related equipment
Location Regulated inside climate L1

The work performed is carried out indoors in a regulated environment, indoors in an unregulated environment, outdoors or in a vehicle. In many occupations, the Main Duties may be performed in more than one location. Therefore, a group may have more than one Location code, for example:

  • firefighting and fire prevention duties
  • maintenance of interior/exterior of buildings
  • managing operations and paperwork of farms

L1 - Regulated inside climate

A normal controlled environment such as an office, hospital or school.

Location Outside L3

The work performed is carried out indoors in a regulated environment, indoors in an unregulated environment, outdoors or in a vehicle. In many occupations, the Main Duties may be performed in more than one location. Therefore, a group may have more than one Location code, for example:

  • firefighting and fire prevention duties
  • maintenance of interior/exterior of buildings
  • managing operations and paperwork of farms

L3 - Outside

An outdoor work environment where the worker is exposed to variations in weather conditions and seasonal weather patterns.

Examples:

  • maintaining lawns
  • repairing buildings, roads, bridges and dams
  • operating power saws to thin and space trees
  • delivering mail

Employment requirements Help

Education/training Help

1
No formal education or training requirements
2
Some high school education and/or on the job training or experience
3
High school
4
Course work, training, workshops and/or experience related to the occupation
5
Apprenticeship, specialized training, vocational school training
6
College, technical school (certificate, diploma)
7
Undergraduate degree
8
Post-graduate or professional degree
+
Additional requirement beyond education and training
R
Regulated requirement(s)
6+, R
  • Completion of a college or university program in broadcasting, theatre arts or a related field
    and
    several years of experience in a related support or assisting occupation in motion pictures, broadcasting or the performing arts are required.
  • Membership in a related union may be required.

Workplaces/employers Help

  • Concert promoters
  • Motion picture and video production companies
  • Recording studios
  • Television and radio stations and networks
  • Theatre, stage and dance companies

Occupational options Help

  • There may be an overlap in duties among occupations in this group, depending on the size of the production or broadcasting studio.

Exclusions Help

Date modified: