View subgroup
Search
Search by job title
Search by CH code
7332.1 – Small appliance servicers and repairers
Small appliance servicers and repairers service and repair small domestic electrical appliances.
Profile
Example titles Help
- Appliance service technician
- Appliance service technician apprentice
- Appliance servicer
- Service technician - electrical appliances
- Vacuum cleaner repairer
- Window air conditioner repairer
Main characteristics Help
- General learning ability to examine and repair small appliances such as power tools, kitchen toasters and electric lawn and garden equipment
- Verbal ability to consult customers and refer to work orders to determine why appliances do not work properly
- Numerical ability to prepare cost estimates of work performed
- Spatial perception and Form perception to refer to schematic diagrams and product manuals, and to recognize structural and mechanical defects
- Motor co-ordination and Finger dexterity and Manual dexterity to handle parts and tools and to pick up and position small parts
- Objective interest in operating electrical test equipment to conduct voltage, resistance and other tests, and in operating soldering equipment and hand tools to replace and repair parts
- Methodical interest in compiling information to prepare reports of work done
- Innovative interest in speaking with customers to establish nature of appliance malfunction and to provide cost estimates for repairs
Aptitudes Help
One of five levels assigned for each factor, with levels representing normal curve distribution of the labour force:
- G
- General learning ability
- V
- Verbal ability
- N
- Numerical ability
- S
- Spatial perception
- P
- Form perception
- Q
- Clerical perception
- K
- Motor co-ordination
- F
- Finger dexterity
- M
- Manual dexterity

- The highest 10% of the working population
- Upper third, exclusive of the highest 10%
- Middle third of the working population
- Lowest third, exclusive of the lowest 10%
- Lowest 10% of the working population
An individual's overall capacity to learn the skills needed to perform job duties is based on his or her specific aptitudes for acquiring information and transforming it into action.
General learning ability G-3
Ability to 'catch on' or understand instructions and underlying principles; to reason and make judgments.
Verbal ability V-3
Ability to understand the meaning of words and the ideas associated with them, and to use them effectively; to comprehend language, to understand relationships between words and to understand the meaning of whole sentences and paragraphs; to present information or ideas clearly.
Numerical ability N-3
Ability to carry out arithmetical processes quickly and accurately.
Spatial perception S-3
Ability to think visually about geometric forms and comprehend the two dimensional representation of three dimensional objects; to recognize the relationships resulting from the movement of objects in space. May be used in such tasks as blueprint reading and in solving geometry problems. Frequently described as the ability to 'visualize' objects of two or three dimensions.
Form perception P-3
Ability to perceive pertinent detail in objects and in pictorial and graphic material; to make visual comparisons and discriminations and to see slight differences in shapes and shadings of figures and widths and lengths of lines.
Clerical perception Q-4
Ability to perceive pertinent detail in verbal or tabular material; to observe differences in copy, to proofread words and numbers, and to avoid perceptual errors in arithmetical computation.
Motor co-ordination K-3
Ability to co-ordinate eyes, hands and fingers rapidly and accurately when required to respond with precise movements.
Finger dexterity F-3
Ability to move the fingers and manipulate small objects with the fingers rapidly and/or accurately.
Manual dexterity M-3
Ability to move the hands easily and skillfully; to work with the hands in placing and turning motions.
Interests Help
Three of five descriptive factors, assigned in order of predominance and lower case rating indicating weaker representation:
- D
- Directive
- I
- Innovative
- M
- Methodical
- O
- Objective
- S
- Social
Objective O
Objective persons enjoy working with tools, equipment, instruments and machinery. They like to repair and/or fabricate things from various materials according to specifications and using established techniques. Objective persons are interested in finding out how things operate and how they are built.
Methodical M
Methodical persons like to have clear rules and organized methods to guide their activities. They prefer working under the direction or supervision of others according to given instructions, or to be guided by established policies and procedures. Methodical persons like to work on one thing until it is completed. They enjoy following a set routine and prefer work that is free from the unexpected.
Innovative i
Innovative persons like to explore things in depth and arrive at solutions to problems by experimenting. They are interested in initiating and creating different ways to solve questions and present information. They enjoy scientific subjects. Innovative persons prefer to be challenged with new and unexpected experiences. They adjust to change easily.
Data, people, and things Help
Data
- 0
- Synthesizing
- 1
- Co-ordinating
- 2
- Analyzing
- 3
- Compiling
- 4
- Computing
- 5
- Copying
- 6
- Comparing
- 7
- N/A
- 8
- Not Significant
People
- 0
- Mentoring
- 1
- Negotiating
- 2
- Instructing - Consulting
- 3
- Supervising
- 4
- Diverting
- 5
- Persuading
- 6
- Speaking - Signaling
- 7
- Serving - Assisting
- 8
- Not significant
Things
- 0
- Setting up
- 1
- Precision working
- 2
- Controlling
- 3
- Driving - Operating
- 4
- Operating - Manipulating
- 5
- Tending
- 6
- Feeding - Offbearing
- 7
- Handling
- 8
- Not significant
Data Compiling 3
Accumulating information usually recorded physically but which may be stored mentally; gathering, collating and classifying information about data, people and things; frequently reporting and/or carrying out a prescribed action in relation to the information.
People speaking 6
Talking with and/or signalling people to convey or exchange information; giving assignments and/or directions to helpers.
Things Operating 4
Using the body, tools or special devices to operate equipment or move, guide, install and place objects or materials. Requires a significant combination of motor co ordination and manual and finger dexterity. Involves some latitude for judgment with regard to precision and selection of appropriate tool, object or material.
Physical activities Help
V - Vision
- 1
- Close visual acuity
- 2
- Near vision
- 3
- Near and far vision
- 4
- Total visual field
H - Hearing
- 1
- Limited
- 2
- Verbal interaction
- 3
- Other sound discrimination
L - Limb co-ordination
- 0
- Not relevant
- 1
- Upper limb co-ordination
- 2
- Multiple limb co-ordination
C - Colour discrimination
- 0
- Not relevant
- 1
- Relevant
B - Body position
- 1
- Sitting
- 2
- Standing and/or walking
- 3
- Sitting, standing, walking
- 4
- Other body positions
S - Strength
- 1
- Limited
- 2
- Light
- 3
- Medium
- 4
- Heavy
Vision Vision V-2
The use of sight in the work performed. The levels are organized in terms of the visual field involved in the performance of the work.
2 - Near vision
Work activities are performed near the worker. The scope of the visual field is broader than in Close visual acuity (1).
Examples:
- reading and interpreting drawings and specifications
- using computer keyboards and reading computer monitors
- repairing automobile engines
- setting up and operating machine tools
Colour discrimination Colour discrimination C-1
The use of colour descrimination to identify, distinguish and match colours and different shades of the same colours.
1 - Relevant
Colour discrimination is relevant in the performance of the work.
Examples:
- observing signals while operating vehicles
- installing, testing and repairing electrical wiring
- restoring and conserving museum and art gallery artifacts
- designing, constructing and repairing dentures
Hearing Hearing H-3
The use of hearing in the work performed. The levels are organized in terms of the type of auditory discrimination involved in the performance of the work.
3 - Other sound discrimination
Work activities involve the identification, assessment and/or production of sound. Verbal interaction (2) is included in this level.
Examples:
- leading bands, orchestras and choirs during musical rehearsals and performances
- administering audiometric tests to diagnose the degree of hearing impairment
- testing automotive systems and components using testing devices to isolate faults
- commanding fishing vessels by operating navigational instruments
Body position Body position B-3
Primary type of posture or body movement involved in performing the work. These postures or body movements range from simple to complex and from sedentary to mobile.
3 - Sitting, standing, walking
This level involves work activities in combinations and varying degrees of Sitting (1) and Standing and/or walking (2).
Examples:
- teaching students through lectures, discussions, audio-visual presentations and field studies
- assessing land values for taxation purposes
- ensuring that systems and equipment are operating efficiently on job sites
- supervising and co-ordinating the activities of workers who cut or stitch fabric, fur or leather garments
Limb co-ordination Limb co-ordination L-1
The use of limbs in performing work.
1 - Upper limb co-ordination
Work activities involve co-ordination of upper limbs.
Examples:
- keyboarding
- performing maintenance services such as oil changes, lubrications and tune-ups
- operating video cameras
- instructing students in sign language
Strength Strength S-2
The use of strength in the handling of loads such as pulling, pushing, lifting and/or moving objects during the work performed.
2 - Light
Work activities involve handling loads of 5 kg but less than 10 kg.
Examples:
- repairing soles, heels and other parts of footwear
- filing materials in drawers, cabinets and storage boxes
- preparing and cooking meals
- repairing paintings and artifacts
Environmental conditions Help
Location
- L1
- Regulated inside climate
- L2
- Unregulated inside climate
- L3
- Outside
- L4
- In a vehicle or cab
Hazards
- H1
- Dangerous chemical substances
- H2
- Biological agents
- H3
- Equipment, machinery, tools
- H4
- Electricity
- H5
- Radiation
- H6
- Flying particles, falling objects
- H7
- Fire, steam, hot surfaces
- H8
- Dangerous locations
Discomforts
- D1
- Noise
- D2
- Vibration
- D3
- Odours
- D4
- Non-toxic dusts
- D5
- Wetness
Discomforts Noise D1
Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.
D1 - Noise
Work that produces sufficient noise – constant or intermittent – to cause marked distraction or possible loss of hearing.
Examples:
- operating drilling equipment in underground mines
- using power saws in logging operations
- blasting rock surface in mining
- operating heavy equipment for construction jobs
- using firearms
Hazards Equipment, machinery, tools H3
Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.
H3 - Equipment, machinery, tools
Working near or with equipment, instruments, machinery or power/hand tools that may be a potential source of accident or injury.
Examples:
- operating metal machining tools to shape metal
- using hand tools to fabricate wood products
- operating power saws to thin trees
- performing surgical procedures
Hazards Electricity H4
Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.
H4 - Electricity
Exposure to electrical circuitry, high tension wires, transformers or other equipment that may be a potential source of electrical shock.
Examples:
- installing or repairing electrical wiring, motors and generators
- maintaining underground power transmission and distribution systems
- operating semi-automatic electric arc welding equipment
- repairing industrial electrical control systems and devices
Location Regulated inside climate L1
The work performed is carried out indoors in a regulated environment, indoors in an unregulated environment, outdoors or in a vehicle. In many occupations, the Main Duties may be performed in more than one location. Therefore, a group may have more than one Location code, for example:
- firefighting and fire prevention duties
- maintenance of interior/exterior of buildings
- managing operations and paperwork of farms
L1 - Regulated inside climate
A normal controlled environment such as an office, hospital or school.
Employment requirements Help
Education/training Help
- 1
- No formal education or training requirements
- 2
- Some high school education and/or on the job training or experience
- 3
- High school
- 4
- Course work, training, workshops and/or experience related to the occupation
- 5
- Apprenticeship, specialized training, vocational school training
- 6
- College, technical school (certificate, diploma)
- 7
- Undergraduate degree
- 8
- Post-graduate or professional degree
- +
- Additional requirement beyond education and training
- R
- Regulated requirement(s)
- Completion of secondary school and training courses or a vocational program is usually required.
- Small appliance repairers usually require some specialized college or high school courses or several months of on-the-job training.
- Appliance service technician, or appliance serviceperson, trade certification is compulsory in Alberta and available, but voluntary, in Newfoundland and Labrador, Nova Scotia, Prince Edward Island, New Brunswick, Quebec, Ontario, British Columbia, the Northwest Territories and Nunavut.
- A provincial gas fitter licence, or gas appliance technician certificate, may be required for gas appliance service technicians.
- Red Seal endorsement is also available to qualified appliance service technicians upon successful completion of the interprovincial Red Seal examination.
Workplaces/employers Help
- Appliance service companies
- Repair departments of retail and wholesale establishments
- Repair shops
- Self-employment
Occupational options Help
- Progression to supervisory positions is possible with experience.
- The Red Seal endorsement allows for interprovincial mobility.
Exclusions Help
- Electronic service technicians (in 2242 Electronic service technicians (household and business equipment))
- Gas fitters (7253)
- Supervisors of appliance servicers and repairers (in 7301 Contractors and supervisors, mechanic trades)
- Heating, refrigeration and air conditioning mechanics (7313)
- Other small engine and small equipment repairers (7335)
- Residential and commercial installers and servicers (7441)
Breakdown summary
- Broad occupational category
- 7 – Trades, transport and equipment operators and related occupations
- Skill level
- B – Occupations usually require college education, specialized training or apprenticeship training
- Minor group
- 73 – Maintenance and equipment operation trades
- Minor group
- 733 – Other mechanics and related repairers
- Unit group
- 7332 – Appliance servicers and repairers
- Version
- NOC 2016 Version 1.3