View subgroup

Search

Search by job title
Search by CH code

9243.1 – Water treatment plant operators

Water treatment plant operators monitor and operate computerized control systems and related equipment in water filtration and treatment plants to regulate the treatment and distribution of water.

Profile

Example titles Help

  • Environmental systems operator - water treatment
  • Water filtration plant operator
  • Water purification plant operator
  • Water treatment plant operator

Main characteristics Help

  • General learning ability to operate and monitor computerized control systems and equipment in water filtration and treatment plants
  • Verbal ability to complete plant logs and reports, and to respond to customer complaints on water quality problems
  • Numerical ability and Clerical perception to read flow meters, gauges and other recording instruments to measure water output, consumption levels, bacterial content, and chlorine and fluoride levels
  • Spatial perception and Form perception to inspect systems and equipment to detect malfunctions and to ensure that they are operating normally
  • Manual dexterity to make adjustments to systems and equipment
  • Objective interest in controlling systems and equipment to regulate the treatment and distribution of water; in performing minor maintenance or assisting skilled tradespersons with installations and repairs of plant machinery; and in measuring, mixing and transporting chemicals to maintain feed stocks
  • Innovative interest in analyzing test results and instrument readings; and in making adjustments to systems and equipment as required
  • Methodical interest in collecting and testing water samples for chemical and bacterial content, and in maintaining plant logs and reports; and in performing security checks in plants and on grounds

Aptitudes Help

One of five levels assigned for each factor, with levels representing normal curve distribution of the labour force:

G
General learning ability
V
Verbal ability
N
Numerical ability
S
Spatial perception
P
Form perception
Q
Clerical perception
K
Motor co-ordination
F
Finger dexterity
M
Manual dexterity

Levels legend, text description directly below.
  1. The highest 10% of the working population
  2. Upper third, exclusive of the highest 10%
  3. Middle third of the working population
  4. Lowest third, exclusive of the lowest 10%
  5. Lowest 10% of the working population

An individual's overall capacity to learn the skills needed to perform job duties is based on his or her specific aptitudes for acquiring information and transforming it into action.

General learning ability G-3

Ability to 'catch on' or understand instructions and underlying principles; to reason and make judgments.

Verbal ability V-3

Ability to understand the meaning of words and the ideas associated with them, and to use them effectively; to comprehend language, to understand relationships between words and to understand the meaning of whole sentences and paragraphs; to present information or ideas clearly.

Numerical ability N-3

Ability to carry out arithmetical processes quickly and accurately.

Spatial perception S-3

Ability to think visually about geometric forms and comprehend the two dimensional representation of three dimensional objects; to recognize the relationships resulting from the movement of objects in space. May be used in such tasks as blueprint reading and in solving geometry problems. Frequently described as the ability to 'visualize' objects of two or three dimensions.

Form perception P-3

Ability to perceive pertinent detail in objects and in pictorial and graphic material; to make visual comparisons and discriminations and to see slight differences in shapes and shadings of figures and widths and lengths of lines.

Clerical perception Q-3

Ability to perceive pertinent detail in verbal or tabular material; to observe differences in copy, to proofread words and numbers, and to avoid perceptual errors in arithmetical computation.

Motor co-ordination K-4

Ability to co-ordinate eyes, hands and fingers rapidly and accurately when required to respond with precise movements.

Finger dexterity F-4

Ability to move the fingers and manipulate small objects with the fingers rapidly and/or accurately.

Manual dexterity M-3

Ability to move the hands easily and skillfully; to work with the hands in placing and turning motions.

Interests Help

Three of five descriptive factors, assigned in order of predominance and lower case rating indicating weaker representation:

D
Directive
I
Innovative
M
Methodical
O
Objective
S
Social

Objective O

Objective persons enjoy working with tools, equipment, instruments and machinery. They like to repair and/or fabricate things from various materials according to specifications and using established techniques. Objective persons are interested in finding out how things operate and how they are built.

Innovative I

Innovative persons like to explore things in depth and arrive at solutions to problems by experimenting. They are interested in initiating and creating different ways to solve questions and present information. They enjoy scientific subjects. Innovative persons prefer to be challenged with new and unexpected experiences. They adjust to change easily.

Methodical M

Methodical persons like to have clear rules and organized methods to guide their activities. They prefer working under the direction or supervision of others according to given instructions, or to be guided by established policies and procedures. Methodical persons like to work on one thing until it is completed. They enjoy following a set routine and prefer work that is free from the unexpected.

Data, people, and things Help

Data

0
Synthesizing
1
Co-ordinating
2
Analyzing
3
Compiling
4
Computing
5
Copying
6
Comparing
7
N/A
8
Not Significant

People

0
Mentoring
1
Negotiating
2
Instructing - Consulting
3
Supervising
4
Diverting
5
Persuading
6
Speaking - Signaling
7
Serving - Assisting
8
Not significant

Things

0
Setting up
1
Precision working
2
Controlling
3
Driving - Operating
4
Operating - Manipulating
5
Tending
6
Feeding - Offbearing
7
Handling
8
Not significant
Data Analyzing 2

Examining and evaluating data; frequently presenting alternative action in relation to the evaluation.

People Not significant 8

Not significant

Things Controlling 2

Starting, stopping, controlling and adjusting machines and equipment designed to fabricate and/or process objects or materials. Operating machines involves minimal set up and adjustment as the work progresses. Controlling equipment involves observing gauges, dials and other indicators, and turning valves and other devices to control factors such as temperature, pressure, flow of liquids, speed of pumps and reactions of materials.

Physical activities Help

V - Vision

1
Close visual acuity
2
Near vision
3
Near and far vision
4
Total visual field

H - Hearing

1
Limited
2
Verbal interaction
3
Other sound discrimination

L - Limb co-ordination

0
Not relevant
1
Upper limb co-ordination
2
Multiple limb co-ordination

C - Colour discrimination

0
Not relevant
1
Relevant

B - Body position

1
Sitting
2
Standing and/or walking
3
Sitting, standing, walking
4
Other body positions

S - Strength

1
Limited
2
Light
3
Medium
4
Heavy
Vision Vision V-2

The use of sight in the work performed. The levels are organized in terms of the visual field involved in the performance of the work.

2 - Near vision

Work activities are performed near the worker. The scope of the visual field is broader than in Close visual acuity (1).

Examples:

  • reading and interpreting drawings and specifications
  • using computer keyboards and reading computer monitors
  • repairing automobile engines
  • setting up and operating machine tools
Colour discrimination Colour discrimination C-1

The use of colour descrimination to identify, distinguish and match colours and different shades of the same colours.

1 - Relevant

Colour discrimination is relevant in the performance of the work.

Examples:

  • observing signals while operating vehicles
  • installing, testing and repairing electrical wiring
  • restoring and conserving museum and art gallery artifacts
  • designing, constructing and repairing dentures
Hearing Hearing H-1

The use of hearing in the work performed. The levels are organized in terms of the type of auditory discrimination involved in the performance of the work.

1 - Limited

Hearing is limited to short and/or infrequent verbal interactions in order to perform the work.

Examples:

  • typing and proofreading correspondence
  • cutting and trimming meat, poultry and fish according to customers' orders
  • carrying linen to and from laundry areas and running errands
  • assisting mine workers in constructing underground installations
Body position Body position B-3

Primary type of posture or body movement involved in performing the work. These postures or body movements range from simple to complex and from sedentary to mobile.

3 - Sitting, standing, walking

This level involves work activities in combinations and varying degrees of Sitting (1) and Standing and/or walking (2).

Examples:

  • teaching students through lectures, discussions, audio-visual presentations and field studies
  • assessing land values for taxation purposes
  • ensuring that systems and equipment are operating efficiently on job sites
  • supervising and co-ordinating the activities of workers who cut or stitch fabric, fur or leather garments
Limb co-ordination Limb co-ordination L-1

The use of limbs in performing work.

1 - Upper limb co-ordination

Work activities involve co-ordination of upper limbs.

Examples:

  • keyboarding
  • performing maintenance services such as oil changes, lubrications and tune-ups
  • operating video cameras
  • instructing students in sign language
Strength Strength S-1

The use of strength in the handling of loads such as pulling, pushing, lifting and/or moving objects during the work performed.

1 - Limited

Work activities involve handling loads up to 5 kg.

Examples:

  • examining and analyzing financial information
  • selling insurance to clients
  • conducting economic and technical feasibility studies
  • administering and marking written tests

Environmental conditions Help

Location

L1
Regulated inside climate
L2
Unregulated inside climate
L3
Outside
L4
In a vehicle or cab

Hazards

H1
Dangerous chemical substances
H2
Biological agents
H3
Equipment, machinery, tools
H4
Electricity
H5
Radiation
H6
Flying particles, falling objects
H7
Fire, steam, hot surfaces
H8
Dangerous locations

Discomforts

D1
Noise
D2
Vibration
D3
Odours
D4
Non-toxic dusts
D5
Wetness
Discomforts Noise D1

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D1 - Noise

Work that produces sufficient noise – constant or intermittent – to cause marked distraction or possible loss of hearing.

Examples:

  • operating drilling equipment in underground mines
  • using power saws in logging operations
  • blasting rock surface in mining
  • operating heavy equipment for construction jobs
  • using firearms
Discomforts Odours D3

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D3 - Odours

The presence of noxious, intense or prolonged odours in the work environment.

Examples:

  • cooking meals
  • colouring, waving and styling hair
  • preserving and sanitizing human remains
  • using industrial cleaning solutions
  • preparing standard cuts of meat, poultry and fish products for sale
Hazards Dangerous chemical substances H1

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H1 - Dangerous chemical substances

Exposure to any chemical that may endanger health through inhalation, absorption or ingestion, contact with skin or eyes, or any chemical with the potential for fire or explosion. Substances may be in forms such as solids, liquids, gases, aerosols or particles.

Examples:

  • extracting coal (involves exposure to silica particles)
  • removing asbestos insulation from buildings
  • joining bricks with mortar (contains lime)
  • mixing pesticides to spray crops
  • painting building interiors
Hazards Equipment, machinery, tools H3

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H3 - Equipment, machinery, tools

Working near or with equipment, instruments, machinery or power/hand tools that may be a potential source of accident or injury.

Examples:

  • operating metal machining tools to shape metal
  • using hand tools to fabricate wood products
  • operating power saws to thin trees
  • performing surgical procedures
Location Regulated inside climate L1

The work performed is carried out indoors in a regulated environment, indoors in an unregulated environment, outdoors or in a vehicle. In many occupations, the Main Duties may be performed in more than one location. Therefore, a group may have more than one Location code, for example:

  • firefighting and fire prevention duties
  • maintenance of interior/exterior of buildings
  • managing operations and paperwork of farms

L1 - Regulated inside climate

A normal controlled environment such as an office, hospital or school.

Employment requirements Help

Education/training Help

1
No formal education or training requirements
2
Some high school education and/or on the job training or experience
3
High school
4
Course work, training, workshops and/or experience related to the occupation
5
Apprenticeship, specialized training, vocational school training
6
College, technical school (certificate, diploma)
7
Undergraduate degree
8
Post-graduate or professional degree
+
Additional requirement beyond education and training
R
Regulated requirement(s)
4, R
  • Completion of secondary school is usually required.
  • College or industry training courses in chemistry, pollution control or related subjects are usually required.
  • Certification in water treatment and distribution (level according to the classification of the plant) is required for water treatment plant operators.
  • Drinking water certification is required in Quebec and Ontario for operators whose work involves water treatment and distribution.
  • On-the-job training is provided.
  • Previous experience as a worker in the water treatment or wastewater field may be required.
  • Certification in workplace hazardous materials information system (WHMIS), transportation of dangerous goods (TDG), and courses in safety practices may be required.

Workplaces/employers Help

  • Industries
  • Institutions
  • Municipal governments

Occupational options Help

  • Progression to supervisory positions is possible with experience.
  • There is limited mobility between water treatment plant and waste plant operators.

Exclusions Help

Remarks Help

  • For some occupations in this group, Hazards H1(Dangerous chemical substances) may also apply

Breakdown summary

Broad occupational category
9 – Occupations in manufacturing and utilities
Skill level
B – Occupations usually require college education, specialized training or apprenticeship training
Minor group
92 – Processing, manufacturing and utilities supervisors and central control operators
Minor group
924 – Utilities equipment operators and controllers
Unit group
9243 – Water and waste treatment plant operators
Version
NOC 2016 Version 1.3
Date modified: