View subgroup

Search criteria:

Search

Search by job title
Search by CH code

4313.0 – Non-commissioned ranks of the Canadian Armed Forces

This group consists of Canadian Armed Forces personnel who are non-commissioned officers (NCOs) or members of other non-commissioned ranks. They provide collective defence measures to protect Canadian waters, land, airspace and other interests. All ranks of non-commissioned officers and members in the air force, army, and navy are included in this group.

Profile

Example titles Help

  • Able seaman - armed forces
  • Chief warrant officer
  • Master corporal
  • Master seaman
  • Ordinary seaman - armed forces
  • Petty officer first class
  • Private
  • Sergeant

Main characteristics Help

  • General learning ability and Verbal ability to provide defence measures to protect Canadian waters, land, airspace and other interests, as well as to engage in peacekeeping operations and enforce cease-fire agreements
  • Spatial perception and Form perception to visualize the relative positions of equipment parts and components, and to detect equipment malfunctions
  • Motor co-ordination and Finger dexterity and Manual dexterity to use various military combat equipment and defence systems
  • Methodical interest in analyzing information to provide aid in emergency situations such as civil disorder, natural disasters and major accidents, as well as to perform administrative and guard duties
  • Objective interest in controlling armoured vehicles, artillery, hand-held weapons and other military combat and defence equipment
  • Social interest in speaking - signaling to engage in drills and other training in preparation for peacekeeping, combat and natural disaster relief duties

Aptitudes Help

One of five levels assigned for each factor, with levels representing normal curve distribution of the labour force:

G
General learning ability
V
Verbal ability
N
Numerical ability
S
Spatial perception
P
Form perception
Q
Clerical perception
K
Motor co-ordination
F
Finger dexterity
M
Manual dexterity

Levels legend
  1. The highest 10% of the working population
  2. Upper third, exclusive of the highest 10%
  3. Middle third of the working population
  4. Lowest third, exclusive of the lowest 10%
  5. Lowest 10% of the working population

An individual's overall capacity to learn the skills needed to perform job duties is based on his or her specific aptitudes for acquiring information and transforming it into action.

General learning ability G-3

Ability to 'catch on' or understand instructions and underlying principles; to reason and make judgments.

Verbal ability V-3

Ability to understand the meaning of words and the ideas associated with them, and to use them effectively; to comprehend language, to understand relationships between words and to understand the meaning of whole sentences and paragraphs; to present information or ideas clearly.

Numerical ability N-4

Ability to carry out arithmetical processes quickly and accurately.

Spatial perception S-3

Ability to think visually about geometric forms and comprehend the two dimensional representation of three dimensional objects; to recognize the relationships resulting from the movement of objects in space. May be used in such tasks as blueprint reading and in solving geometry problems. Frequently described as the ability to 'visualize' objects of two or three dimensions.

Form perception P-3

Ability to perceive pertinent detail in objects and in pictorial and graphic material; to make visual comparisons and discriminations and to see slight differences in shapes and shadings of figures and widths and lengths of lines.

Clerical perception Q-4

Ability to perceive pertinent detail in verbal or tabular material; to observe differences in copy, to proofread words and numbers, and to avoid perceptual errors in arithmetical computation.

Motor co-ordination K-3

Ability to co-ordinate eyes, hands and fingers rapidly and accurately when required to respond with precise movements.

Finger dexterity F-3

Ability to move the fingers and manipulate small objects with the fingers rapidly and/or accurately.

Manual dexterity M-3

Ability to move the hands easily and skillfully; to work with the hands in placing and turning motions.

Interests Help

Three of five descriptive factors, assigned in order of predominance and lower case rating indicating weaker representation:

D
Directive
I
Innovative
M
Methodical
O
Objective
S
Social

Methodical M

Methodical persons like to have clear rules and organized methods to guide their activities. They prefer working under the direction or supervision of others according to given instructions, or to be guided by established policies and procedures. Methodical persons like to work on one thing until it is completed. They enjoy following a set routine and prefer work that is free from the unexpected.

Objective O

Objective persons enjoy working with tools, equipment, instruments and machinery. They like to repair and/or fabricate things from various materials according to specifications and using established techniques. Objective persons are interested in finding out how things operate and how they are built.

Social s

Social persons like dealing with people. They enjoy caring for and assisting others in identifying their needs and solving their concerns. Social persons like working and co-operating with others. They prefer to be involved in work that requires interpersonal contact.

Data, people, and things Help

Data

0
Synthesizing
1
Co-ordinating
2
Analyzing
3
Compiling
4
Computing
5
Copying
6
Comparing
7
N/A
8
Not Significant

People

0
Mentoring
1
Negotiating
2
Instructing - Consulting
3
Supervising
4
Diverting
5
Persuading
6
Speaking - Signaling
7
Serving - Assisting
8
Not significant

Things

0
Setting up
1
Precision working
2
Controlling
3
Driving - Operating
4
Operating - Manipulating
5
Tending
6
Feeding - Offbearing
7
Handling
8
Not significant
Data Analyzing 2

Examining and evaluating data; frequently presenting alternative action in relation to the evaluation.

People speaking - Signaling 6

Talking with and/or signalling people to convey or exchange information; giving assignments and/or directions to helpers.

Things Controlling 2

Starting, stopping, controlling and adjusting machines and equipment designed to fabricate and/or process objects or materials. Operating machines involves minimal set up and adjustment as the work progresses. Controlling equipment involves observing gauges, dials and other indicators, and turning valves and other devices to control factors such as temperature, pressure, flow of liquids, speed of pumps and reactions of materials.

Physical activities Help

V - Vision

1
Close visual acuity
2
Near vision
3
Near and far vision
4
Total visual field

H - Hearing

1
Limited
2
Verbal interaction
3
Other sound discrimination

L - Limb co-ordination

0
Not relevant
1
Upper limb co-ordination
2
Multiple limb co-ordination

C - Colour discrimination

0
Not relevant
1
Relevant

B - Body position

1
Sitting
2
Standing and/or walking
3
Sitting, standing, walking
4
Other body positions

S - Strength

1
Limited
2
Light
3
Medium
4
Heavy
Vision Total visual field V-1-4*

The use of sight in the work performed. The levels are organized in terms of the visual field involved in the performance of the work.

Colour discrimination Relevant C-0-1*

The use of colour descrimination to identify, distinguish and match colours and different shades of the same colours.

Hearing Other sound discrimination H-1-3*

The use of hearing in the work performed. The levels are organized in terms of the type of auditory discrimination involved in the performance of the work.

Body position Other body positions B-1-4*

Primary type of posture or body movement involved in performing the work. These postures or body movements range from simple to complex and from sedentary to mobile.

Limb co-ordination Multiple limb co-ordination L-0-2*

The use of limbs in performing work.

Strength Heavy S-1-4*

The use of strength in the handling of loads such as pulling, pushing, lifting and/or moving objects during the work performed.

Environmental conditions Help

Location

L1
Regulated inside climate
L2
Unregulated inside climate
L3
Outside
L4
In a vehicle or cab

Hazards

H1
Dangerous chemical substances
H2
Biological agents
H3
Equipment, machinery, tools
H4
Electricity
H5
Radiation
H6
Flying particles, falling objects
H7
Fire, steam, hot surfaces
H8
Dangerous locations

Discomforts

D1
Noise
D2
Vibration
D3
Odours
D4
Non-toxic dusts
D5
Wetness
Discomforts Noise D1

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D1 - Noise

Work that produces sufficient noise – constant or intermittent – to cause marked distraction or possible loss of hearing.

Examples:

  • operating drilling equipment in underground mines
  • using power saws in logging operations
  • blasting rock surface in mining
  • operating heavy equipment for construction jobs
  • using firearms
Discomforts Vibration D2

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D2 - Vibration

Work that produces an oscillating or quivering motion of the body.

Examples:

  • operating jackhammers to break up pavement
  • driving tractors
  • operating drills to produce blasting holes in mines
  • shaping metal using power-forging machinery
Discomforts Odours D3

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D3 - Odours

The presence of noxious, intense or prolonged odours in the work environment.

Examples:

  • cooking meals
  • colouring, waving and styling hair
  • preserving and sanitizing human remains
  • using industrial cleaning solutions
  • preparing standard cuts of meat, poultry and fish products for sale
Discomforts Non-toxic dusts D4

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D4 - Non-toxic dusts

The presence of non-poisonous airborne particles such as textile dust, flour, sand, sawdust and feathers in the work environment.

Examples:

  • preparing dough or batter
  • cutting fur pelts or fabric for garments
  • operating woodworking machines
  • cleaning chimneys
  • removing poultry feathers
Discomforts Wetness D5

Work conditions that create disturbances but are not hazardous. In general, these conditions create discomfort, but are not direct sources of injury. In extreme instances, however, these conditions might cause injury.

D1 - Noise

Work that produces sufficient noise – constant or intermittent – to cause marked distraction or possible loss of hearing.

Examples:

  • operating drilling equipment in underground mines
  • using power saws in logging operations
  • blasting rock surface in mining
  • operating heavy equipment for construction jobs
  • using firearms
Hazards Dangerous chemical substances H1

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H1 - Dangerous chemical substances

Exposure to any chemical that may endanger health through inhalation, absorption or ingestion, contact with skin or eyes, or any chemical with the potential for fire or explosion. Substances may be in forms such as solids, liquids, gases, aerosols or particles.

Examples:

  • extracting coal (involves exposure to silica particles)
  • removing asbestos insulation from buildings
  • joining bricks with mortar (contains lime)
  • mixing pesticides to spray crops
  • painting building interiors
Hazards Biological agents H2

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H2 - Biological agents

Exposure to infectious bacteria and viruses as a result of indirect contact with, or direct handling of, infectious materials or micro-organisms that may cause illness.

Examples:

  • treating sick animals
  • providing nursing care
  • investigating outbreaks of food and environment-related diseases and poisonings
  • conducting microbiological tests and laboratory analyses
Hazards Equipment, machinery, tools H3

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H3 - Equipment, machinery, tools

Working near or with equipment, instruments, machinery or power/hand tools that may be a potential source of accident or injury.

Examples:

  • operating metal machining tools to shape metal
  • using hand tools to fabricate wood products
  • operating power saws to thin trees
  • performing surgical procedures
Hazards Electricity H4

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H4 - Electricity

Exposure to electrical circuitry, high tension wires, transformers or other equipment that may be a potential source of electrical shock.

Examples:

  • installing or repairing electrical wiring, motors and generators
  • maintaining underground power transmission and distribution systems
  • operating semi-automatic electric arc welding equipment
  • repairing industrial electrical control systems and devices
Hazards Radiation H5

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H5 - Radiation

Exposure to ionizing radiation such as X-rays and radioactive substances or non-ionizing radiation such as radio frequencies and infrared, ultraviolet or visible light that may affect health adversely.

Examples:

  • taking dental X-rays
  • preparing and administering radioactive drugs
  • operating welding equipment (ultraviolet)
  • controlling the flow of air traffic using radar monitors, radio and other equipment (radio frequencies)
  • conducting atmospheric research (visible laser light)
  • creating glass objects (infrared)
Hazards Flying particles, falling objects H6

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H6 - Flying particles, falling objects

Exposure to flying particles and falling objects in the work environment that pose the risk of bodily injury.Flying particles refer to particles such as wood chips, metal particles and rock chips generated by the handling, crushing, grinding, rapid impact or explosion of materials.

Examples:

  • operating machining tools such as lathes/grinders
  • constructing underground installations in mines using hand and power tools
  • operating chain saws to fell, delimb and buck trees
  • operating hoisting devices to load cargo onto ships
  • laying brick to construct or repair walls
Hazards Fire, steam, hot surfaces H7

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H7 - Fire, steam, hot surfaces

Exposure to fire (rather than exposure to flammable substances that may ignite), to emissions of steam or to intensely hot surfaces that are potential sources of injury.

Examples:

  • fighting fires
  • operating gas flame welding equipment
  • cooking food
  • forging metal items by hand or with forging machinery
  • tending industrial ovens/furnaces
Hazards Dangerous locations H8

Potential hazards to which the worker may be exposed. The codes provide an indication of the type(s) of hazard(s) most likely to be present in the workplace environment. They are not a measure of frequency, duration or degree of exposure to hazards, but an indication of the presence or absence of a particular hazard in the work environment.

H8 - Dangerous locations

Working in locations that are inherently treacherous and are potential sources of injury. Such work locations include construction sites, underground sites, erected support structures and marine environments.

Examples:

  • building underground passageways in mines
  • installing roof shingles
  • washing exterior windows of buildings
  • commanding fishing vessels
  • operating underwater video, sonar, recording and related equipment
Location Regulated inside climate L1

The work performed is carried out indoors in a regulated environment, indoors in an unregulated environment, outdoors or in a vehicle. In many occupations, the Main Duties may be performed in more than one location. Therefore, a group may have more than one Location code, for example:

  • firefighting and fire prevention duties
  • maintenance of interior/exterior of buildings
  • managing operations and paperwork of farms

L1 - Regulated inside climate

A normal controlled environment such as an office, hospital or school.

Location Unregulated inside climate L2

The work performed is carried out indoors in a regulated environment, indoors in an unregulated environment, outdoors or in a vehicle. In many occupations, the Main Duties may be performed in more than one location. Therefore, a group may have more than one Location code, for example:

  • firefighting and fire prevention duties
  • maintenance of interior/exterior of buildings
  • managing operations and paperwork of farms

L2 - Unregulated inside climate

An inside work environment where the temperature or humidity may be considerably different from normal room conditions. In some groups, the nature of the duties affects the temperature or humidity of the work environment.

Examples:

  • extracting coal/ore from underground mines
  • operating machines that press or blow molten glass
  • unloading stock into cold storage freezers
  • operating furnaces to melt metals for casting
Location Outside L3

The work performed is carried out indoors in a regulated environment, indoors in an unregulated environment, outdoors or in a vehicle. In many occupations, the Main Duties may be performed in more than one location. Therefore, a group may have more than one Location code, for example:

  • firefighting and fire prevention duties
  • maintenance of interior/exterior of buildings
  • managing operations and paperwork of farms

L3 - Outside

An outdoor work environment where the worker is exposed to variations in weather conditions and seasonal weather patterns.

Examples:

  • maintaining lawns
  • repairing buildings, roads, bridges and dams
  • operating power saws to thin and space trees
  • delivering mail
Location In a vehicle or cab L4

The work performed is carried out indoors in a regulated environment, indoors in an unregulated environment, outdoors or in a vehicle. In many occupations, the Main Duties may be performed in more than one location. Therefore, a group may have more than one Location code, for example:

  • firefighting and fire prevention duties
  • maintenance of interior/exterior of buildings
  • managing operations and paperwork of farms

L4 - In a vehicle or cab

An interior space in any form of vehicle or in the cab of heavy equipment operated by the worker.

Examples:

  • driving buses
  • operating cranes
  • providing service to passengers during flights
  • operating subway transit vehicles

Employment requirements Help

Education/training Help

1
No formal education or training requirements
2
Some high school education and/or on the job training or experience
3
High school
4
Course work, training, workshops and/or experience related to the occupation
5
Apprenticeship, specialized training, vocational school training
6
College, technical school (certificate, diploma)
7
Undergraduate degree
8
Post-graduate or professional degree
+
Additional requirement beyond education and training
R
Regulated requirement(s)
5
  • Completion of secondary school is usually required.
  • Three months of basic military training are provided.
  • Specialized training in the operation and maintenance of military equipment and systems is provided.

Workplaces/employers Help

  • Armed forces

Occupational options Help

  • Progression to commissioned officer occupations is possible with additional training and experience.

Exclusions Help

Remarks Help

  • For these occupations, Body position 1 and 2 and 3 and 4(Sitting and Standing and/or walking and Sitting, standing, walking and Other body positions), Colour discrimination 0 and 1(Not relevant and Relevant), Hearing 1 and 2 and 3(Limited and Verbal interaction and Other sound discrimination), Limb co-ordination 0 and 1 and 2(Not relevant and Upper limb co-ordination and Multiple limb co-ordination), Strength 1 and 2 and 3 and 4(Limited and Light and Medium and Heavy), Vision 1 and 2 and 3 and 4(Close visual acuity and Near vision and Near and far vision and Total visual field) may also apply.
  • For these occupations, Discomforts D1 and D2 and D3 and D4 and D5(Noise and Vibration and Odours and Non-toxic dusts and Wetness), Hazards H1 and H2 and H3 and H4 and H5 and H6 and H7 and H8(Dangerous chemical substances and Biological agents and Equipment, machinery, tools and Electricity and Radiation and Flying particles, falling objects and Fire, steam, hot surfaces and Dangerous locations), Location L1 and L2 and L3 and L4(Regulated inside climate and Unregulated inside climate and Outside and In a vehicle or cab) may also apply.
  • Personnel in this group are assigned to specific operations related to reconnaissance, peacekeeping, disaster relief and combat.

Breakdown summary

Broad occupational category
4 - Occupations in education, law and social, community and government services
Skill level
B - Occupations usually require college education, specialized training or apprenticeship training
Major group
43 - Occupations in front-line public protection services
Minor group
431 - Occupations in front-line public protection services
Unit group
4313 - Non-commissioned ranks of the Canadian Armed Forces
Version
2016
Date modified: